Counter/Frequency Module Command; Configuration, Counter Input And Display Command Set - Advantech ADAM 4000 Series User Manual

4080, 4080D

4.7 Counter/Frequency Module Command

4.7.1 Configuration, Counter Input and Display Command Set

Command Syntax
%AANNTTCCFF
$AA6
#AABB(data)
#**
$AA4
$AA2
$AA5
$AAF
$AAM
Command
Name
Configuration Sets the address, input range,
baud rate, and/or checksum
status, to a digital I/O module
Digital Data In Returns the values of digital I/O
channels of the addressed
module
Digital Data Writes specified values to either a
Out single channel or all channels
simultaneously
Synchronized Orders all digital I/O modules to
Sampling sample their input values and
store them in a special register
Read Returns the value that was stored
Synchronized in the specified digital I/O module
Data that was stored after an #**
command
Configuration Returns the configuration
Status parameters for the specified
digital I/O module
Reset Status Indicates whether a specified
digital I/O module was reset after
the last time the $AA5 command
was issued
Read Firmware Return firmware version code
Version from the specified digital I/O
module
Read Module Return the module name from
Name the specified digital I/O module
Description
Chapter 4 Command Set
4
Chapter
I/O Module
4050, 4052,
4053, 4060,
4051, 4055
4050, 4052,
4053, 4060,
4051, 4055
4050, 4060, 4055
4050, 4052,
4053, 4060,
4051, 4055
4050, 4052,
4053, 4060,
4051, 4055
4050, 4052,
4053, 4060,
4051, 4055
4050, 4052,
4053, 4060,
4051, 4055
4050, 4052,
4053, 4060,
4051, 4055
4050, 4052,
4053, 4060,
4051, 4055
4-167