Analog Input Module Command; Analog Input Command Set - Advantech ADAM 4000 Series User Manual

4.4 Analog Input Module Command

4.4.1 Analog Input Command Set

Command Syntax
%AANNTTCCFF
$AA2
$AAF
$AAM
#AA
#AAN
#AA5VV
(continued on following page)
Command Name
Configuration Sets the address, input
range, baud rate, data
format, checksum status,
and/or integration time for a
specified analog input
module
Configuration Returns the configuration
Status parameters for the specified
analog input module
Read Firmware Returns the firmware
Version version code from the
specified analog input
module
Read Module Returns the module name
Name from the specified analog
input module
Analog Data In Returns the input value from
a specified analog input
moudule in the currently
configured data format
Read Analog Input Returns the input value from
from Channel N channel number n of the
specified analog input
module
Enable/Disable Enables/disables
Channels for multiplexing simultaneously
Multiplexing for separate channels of the
specified input module
Description
Chapter 4 Command Set
4
Chapter
I/O Module
4011, 4011D, 4012,
4013, 4015, 4016,
4017, 4018, 4018M,
4019
4011, 4011D, 4012,
4013, 4015, 4016,
4017, 4018, 4018M,
4019
4011, 4011D, 4012,
4013, 4015, 4016,
4017, 4018,
4018M,4019
4011, 4011D, 4012,
4013, 4015, 4016,
4017, 4018, 4018M,
4019
4011, 4011D, 4012,
4013, 4015, 4016,
4017, 4018, 4019
4015, 4017, 4018,
4018M, 4019
4015, 4017, 4018,
4018M, 4019
4-41