Instrumentation - Regal 3300 Owner's Manual

Engine & Controls

INSTRUMENTATION

The engine wiring is protected by a main breaker or fuses mounted
on or close to the engine. Refer to your specific engine manual for
information on type and location. If an ignition breaker "pops" figure
out the reason why before resetting it.
Each dash switch is also protected by a breaker located on the breaker
panel.
The helm station is equipped with a fuel gauge and depth gauge along
with the ability to monitor engine functions through a display panel.
Close observation of the gauges may save the engine from damage.
Gauges do, however, have some inaccuracy, so do not rely upon them
fully.
Note with the battery switches in the OFF position, there is no power
to the dashboard, and the ignition switch will not function properly.
https://www.boat-manuals.com/
3-29