Regal 3300 Owner's Manual page 162

CHAPTER 6
Drain Plug
!
CAUTION
To prevent vessel from sinking, install drain plug!
Your boat is equipped with a drain plug. Make sure it is tightly installed
before launching. Tighten with a wrench. Do not use your fingers alone.
Before dry storing remove the drain plug to help eliminate any bilge
water accumulation or run the bilge pump. When the water stream is
diminished, remove foreign objects stuck in the drain hole. Remove
the drain plug if storing the boat for extended periods especially in
colder climates.
https://www.boat-manuals.com/
6-2