Regal 3300 Owner's Manual page 208

CHAPTER 6
To minimize shock and fire hazard that could result in death or
serious injury:
• Before using the shore power cord, examine the cable for
damage. Never use the shore power cord if it appears cut or
damaged.
• Turn off the yacht's shore connection switch before connecting
or disconnecting the cord.
• Connect the shore power cord to the yacht's inlet before
connecting to the shore power source.
• If the yacht is equipped with a polarity indicator that activates,
disconnect the shore power cord and correct the polarity.
• Disconnect the shore power cord at the shore outlet first.
• Never leave the shore power cord connected to the shore
outlet when the cord is not in use.
• Close the shore power inlet cover tightly.
• If the reverse polarity indicator light is activated, do not use the
electrical system. Correct the polarity fault before activating
the electrical system on the yacht.
• Never alter the plug and connector on the shore power cord..
Always turn off the SHORE 1 and SHORE 2 circuit breaker groups
before connecting to the shore power. This prevents arcing and
burning of the shore power cord receptacles. Disconnecting will
protect the electrical equipment on board from rapid ON/OFF
current connections, which may occur during the connection
process.
6-48
!
WARNING
https://www.boat-manuals.com/