Chapter 1: Warning Labels; Chapter 2: General Safety Recommendations - Nabco GT1175 Installation Manual

Standard and pocketed slide doors
Hide thumbs Also See for GT1175:
Table of Contents

Advertisement

GT1175 Standard and Pocketed Slide Doors Installation Manual; with Opus Controller
P/N C-00370
CHAPTER 1: WARNING LABELS
Warning labels are universal and used to alert an individual of potential harm to one's self or to others. The following warning
labels are listed in a hierarchy order that defines the most potential danger first, and the least potential danger last. Please refer
to this page in the event that a warning label is displayed within this manual and further definition needs to be explained.
Indicates potentially dangerous situations . Danger is used when there is a hazardous situation
DANGER
where there is a
damage unless personal injury risk is present .
Indicates a hazardous situation which has
WARNING
considered for property damage unless personal injury risk is present .
Indicates a hazardous situation which
CAUTION
when there is a possibility of serious injury . Caution should not be considered for property damage
accidents unless a personal injury risk is present .
Attention:  A situation where material could be damaged or the function impaired .
Notice: Indicates a statement of company policy as the message relates to the personal safety or protection of
property . Notice should not be used when there is a hazardous situation or personal risk .
Note: Indicates important information that provides further instruction.
CHAPTER 2: GENERAL SAFETY RECOMMENDATIONS
Do not install, operate or service this product unless you have read and understand the General
WARNING
WARNING
WARNING
Safety Recommendations, Warning Labels, contained in this manual . Failure to do so may result in
bodily injury, or property damage .
Read, study and understand the installation and operating instructions contained in, or referenced
WARNING
in this manual before operating . If you do not understand the instruction, ask a qualified technician .
Failure to do so may result in bodily injury, or property damage and will nullify all warranties .
For Indoor use only .
WARNING
WARNING
Use this operator only with Nabco sliding doors .
WARNING
Disconnect all power to the junction box prior to making any electrical connections . Failure to
DANGER
do so may result in serious personal or fatal injury . When uncertain whether power supply is
disconnected, always verify using a voltmeter .
Do not place finger or uninsulated tools inside the electrical Control . Touching wires or other parts
DANGER
inside the enclosure may cause electrical shock, serious injury or death .
The Ground wire from the OPUS Control 120 VAC Harness, and the Incoming 120 VAC Ground wire
CAUTION
must be connected to the Ground screw located within the Swing door Header .
If the door appears broken or does not seem to work correctly, it should be immediately removed
CAUTION
from service until repairs can be carried out or a qualified service technician is contacted for
corrective action .
Notice: This manual, the owner's manual and all other associated manuals must be given to and retained by the
purchasing facility or end user .
Notice: Wiring must meet all local, state, federal or other governing agency codes . All electrical troublshooting
or service must be performed by qualified electrical technicians and must comply with all applicable
governing agency codes .
4 of 62
probability of severe injury or death . It should not be considered for property
high
may result in a minor injury
probability of severe injury . It should not be
some
www.NabcoEntrances.com
Rev 11-12-20
. Caution should not be used

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents