Logic Elements; Virtual Inputs; Remote Inputs; Remote Outputs - GE Multilin 350 Series Instruction Manual

CHAPTER 4: ACTUAL VALUES

4.2.4 Logic elements

4.2.5 Virtual inputs

4.2.6 Remote inputs

4.2.7 Remote outputs

350 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
Courtesy of NationalSwitchgear.com
OUTPUT RELAY 3 to 6 (Auxiliary Output Relays)
OFF
Range: Off, On
OUTPUT RELAY 7 (Critical Failure Relay)
Range: Off, On
The "ON" state indicates that the relay is in-service.
PATH:
ACTUAL VALUES > A1 STATUS > LOGIC ELEMENTS
LOGIC ELEMENT 1 to 8
OFF
Range: Off, On
The state "ON" or "OFF" for each logic element depends on its programmed logic:
triggering inputs, blocking inputs, plus any pickup, and/or reset time delay.
The state of all active virtual inputs is displayed here.
PATH:
ACTUAL VALUES > A1 STATUS > VIRTUAL INPUTS
VIRTUAL INPUTS 1 to 32
OFF
Range: Off, On
The state of all active remote inputs is displayed here.
PATH:
ACTUAL VALUES > A1 STATUS > REMOTE INPUTS
REMOTE INPUTS 1 to 32
OFF
Range: Off, On
The state of all active remote outputs is displayed here.
PATH: ACTUAL VALUES > A1 STATUS > REMOTE OUTPUTS
REMOTE OUTPUTS 1 to 32
OFF
Range: Off, On
A1 STATUS
4–5