Micromeritics TriStar II 3020 Installation Instructions And Checklist page 44

5 Operational Verification
D
EVELOPER
A Developer is allowed to view and edit parameters of the sample file
1. Go to File > New > Sample Information.
2. Select a template to use, then click Create. In the Sample field, enter or edit the description .
3. Complete the fields from the following table.
Developer Fields
Fields
Sample
Operator
Submitter
Mass
Density
4. Select if data will be manually entered or automatically collected. If Manually entered is selec-
ted, an Entered tab displays across the top of the window.
5. Click each parameter tab and make any necessary edits. Refer to the TriStar II 3020 Confirm
Operator Manual for detailed instructions on these fields.
6. Click Save and complete the Save As options.
7. Click Close.
5 - 6
Description
Enter or edit the description for the analysis.
Enter the name of the operator performing the analysis.
Enter the name of the department, company, etc. submitting the
sample for analysis.
Enter the sample mass.
Enter the sample density. This value is applicable only when using the
Calculated free-space method.
TriStar II 3020 Confirm Installation Instructions and Checklist
302-42870-04 (Rev A) — Sep 2017