2N 9152101W Installation Manual page 62

Connection:
®
Connect the 2N Security Relay
To the intercom active output (OUT1 or OUT2 if a reader module or additional
switch is connected)
Connect the electric lock to the
To the switched output.
To the passive output in series with the external power supply.
The device also supports a Departure button connected between the 'PB' and '-
HeliosIP/IP Intercom' terminals. Press the Departure button to activate the output for
5 seconds.
2N TELEKOMUNIKACE a.s., www.2n.cz
to the intercom as follows:
®
2N Security Relay output as follows:
62/85