2N 9152101W Installation Manual page 48

Factory Reset (PCB version 555v8 and latest)
Follow the instructions below to
Press and hold the RESET button.
Wait until the red and green LEDs go on simultaneously and the acoustic signal
can be heard (approx. 15–35 s).
Wait until the red LED goes off and the acoustic signal
(approx. for another 3 s).
Wait until the green LED goes off and the red LED goes on again and the
acoustic signal
Wait until the red LED goes off and the acoustic signal
(approx. for another 3 s).
Release the RESET button.
2N TELEKOMUNIKACE a.s., www.2n.cz
reset the factory default values
can be heard (approx. for another 3 s).
:
can be heard
can be heard
48/85