Caution
In case of resetting the factory default settings on a device with a
version of firmware 2.18 or higher it is necessary to reprogram the
®
2N
Security Relay
Device Restart
Press the RESET button shortly (< 1 s) to restart the system without changing
configuration.
Note
The time interval between the short press of RESET and reconnection
after restart is 25–50 s for
2N TELEKOMUNIKACE a.s., www.2n.cz
using the instructions from section
®
2N
IP Safety
2.4
.
depending on the HW version.
49/85