Apply Modulation - 1010music Toolbox v 2.1.2 User Manual

Apply Modulation

Modulation is another way that you can alter your sequences using internal or external inputs. Many of the cell parameters can
be modulation targets. These targets can have their values altered by modulation sources. The available modulation sources
are:
•
CV Modulation inputs (EXT1, EXT2, EXT3 and EXT4),
•
LFO cells which are aligned with CV Outputs 5 through 8 (LFO1, LFO2, LFO3, LFO4)
•
SEQ cells which are aligned with CV Outputs 5 through 8 (SEQ1, SEQ2, SEQ3, SEQ4)
Note:
•
GATE, NOTE, CREC, CPLY and OUT cells may not be used as modulation sources.
•
Only the cells in the column in line with CV Mod 5 through 8 may be used as modulation sources.
•
Toolbox always displays the same list of modulation sources even if there is no such cell configured (e.g. LFO4 is still
listed if there is no LFO4 in this preset). If you select a modulation source that is not available, the parameter will not
be modulated until that modulation source is configured.
See the parameter tables above for each of the cell types to see which parameters are Modulation Targets.
To apply a modulator to a specific modulation target:
1. From the Main screen, touch a cell that has modulation targets and press INFO to display the corresponding
parameters screen.
2. The parameters which can be modulated will have three black boxes below them. This allows you to apply up to three
modulators to each of these parameters. Touch one of the boxes below a parameter to open the
Selection Screen
3. Adjust the modulation parameters by turning the Control Knob closest to the parameter.
Parameter Description
Source
The source of modulation to be applied.
Amount
Choose the amount of modulation that will be
applied.
4. Once you have selected all the settings, touch the arrow (
parameters screen.
5. Touch another black box below a parameter to add more modulation.
6. Press HOME to return to the Main screen.
5/5/2021 4:50:00 PM
.
Copyright 1010music LLC 2021
Toolbox User Manual v 2.1.2
Range of Values
• None
• LFO1
• LFO2
• LFO3
• LFO4
• SEQ1
-100% to +100%
<-
) in the top left or press HOME to go back to the
Modulation
• SEQ2
• SEQ3
• SEQ4
• EXT1
• EXT2
• EXT3
• EXT4
P. 32