Table of Contents
Advertisement
Load a WAV File into a CPLY Cell
You don't need to use a CREC cell to load a WAV file into a CPLY cell. You can also load the WAV file
directly into CPLY. Here's how:
1.
Navigate to the CPLY Wave screen.
2.
Touch the name of the WAV file in the top row of the screen to display the WAV file selection
screen.
3.
Use the Control Knobs to scroll through the list of files until the desired file is highlighted.
Load
4.
Touch
in the top right corner to load the selected WAV file and display the CPLY WAV
screen.
Use an Additional CPLY Output Cell (OUT) for Multi-Channel Playback
When you record into a CREC cell, you have the option of recording stereo inputs. However, the resulting CPLY cell will only
play the first channel out through the corresponding output jack. You can use an OUT cell to play the second channel. Also, if
you load a WAV file into toolbox that has more than 2 channels, you can play up to 8 channels by using 7 OUT cells. When an
OUT cell is used, the playback and muting of that cell is tied entirely to the Parent cell. Even if you MUTE the OUT cell, you will
still hear its output if the Parent cell is not muted. The Parent cell will trigger the playback of the OUT cell.
To create an OUT cell:
1.
Press HOME if needed to return to the Main Screen.
2.
Touch a cell that is mapped to a CV Output jack to open the parameters screen for that cell.
3.
Touch the Cell Type button in the top row next to the grid icon, and then select the Cell Type of
4.
Use the Control Knobs to set the values of the following parameters:
Parameter
Description
Parent
Choose the CPLY cell that will be the source
of the WAV file for this cell. The Parent will
control playback of this OUT cell. The cells
are identified as a row, column pair, where
the bottom row is Row 1, and the left
column is Column 1.
Channel
Which channel of a multichannel WAV file
will be played back. Choose 2 to play the
second channel of a stereo WAV file.
The OUT cell will now playback the selected channel of the parent cell in synch with the parent cell.
Note:
•
The playback of the OUT cell is controlled exclusively by the playback of its parent cell. This includes Muting.
5/5/2021 4:50:00 PM
Range of Values
1,1 through 4,5.
allow you to choose values in Columns 1
through 3, but only columns 4 and 5 can have
CPLY cells and thus be valid Parents.
1 through 8
(Toolbox will allow you to pick a channel that
does not exist in the file)
Copyright 1010music LLC 2021
Toolbox User Manual v 2.1.2
CPLY Wave Screen
OUT
.
Mod
Target?
No
Toolbox will
No
P. 31
Advertisement
Table of Contents
