Table of Contents
Advertisement
Guide on our website at
https://1010music.com/stereo-minijacks-midi-connections-compatibility-guide
about the MIDI adapter. The toolbox uses a Type B TRS connection.
Toolbox accepts input from all MIDI channels. The current recording context will define which sequence cell will receive the
MIDI input. We will go into more detail about MIDI inputs and outputs later.
Global Module Settings
Before we dive into using the module, we will configure two global module settings:
Brightness
and
.
To access these settings, press and hold the HOME button until you see the Menu screen shown
in Menu Screen to the right. The number in the lower right corner of the screen displays the
current version of the firmware installed on the module.
From the Menu Screen, touch
the parameter to adjust its value.
Flip UI
The
setting will turn the user interface upside down so you can use the module with
the touchscreen on the bottom. As soon as you change the value for
interface will be inverted. This means you will need to change which knob you use to change it back.
Press the HOME button twice to go back to the Main screen.
The table below has a description of the full list of module settings. We will go into more detail about them later in the
document. Note that you can push INFO again while on the first page of settings to access the second page of settings.
Parameter
Description
Flip UI
Set to Off if the module is used with the
screen above the jacks. Set to On for the
flipped orientation.
Brightness
Configure the brightness of the screen.
GlobalMIDI
Controls which incoming MIDI channel will
be used for recording sequences, MIDI
program changes, MIDI clock and
modulation.
MIDI PC
When On, toolbox will respond to a MIDI
Program change messages received on the
GlobalMIDI channel by opening the Preset
that maps to the specified program number.
Remember that blackbox does not
automatically save changes. This means that
when you change presets using a MIDI
Program Change you will lose any unsaved
changes.
TouchPlay
When On, touching a cell will toggle its
activation state, even if the cell is not
currently selected. If Off, the first touch of
an unselected cell will select it and
subsequent touches will toggle the
activation state.
The settings on this screen persist across Presets. They will stay the same until you come back to this screen to change them,
even if you change presets.
5/5/2021 4:50:00 PM
Settings
to display the Settings screen. Use the knob closest to
Copyright 1010music LLC 2021
Toolbox User Manual v 2.1.2
Flip UI
Flip UI
, the user
Range of Values
On, Off
0% to 100%
Omni, None, Ch 1 through
16
On, Off
On, Off
for more details
Menu Screen
P. 13
Advertisement
Table of Contents
