Synchronizing With Other Instruments - 1010music Toolbox v 2.1.2 User Manual

Synchronizing with Other Instruments

Toolbox is designed to work together with other modules. It can follow external clock inputs and then use them to control the
CV and MIDI outputs to other modules. For each sequencer cell you can configure which clock source it will follow. The toolbox
internal clock can be driven by three sources, and will use the highest priority clock signal available. The sources, in decreasing
order of priority are:
1. CV clock input in the Clock Input jack
2. MIDI Clock from the MIDI Input jack
3. Internal free running clock
When a MIDI Clock is used, toolbox responds to MIDI clock pulse, play and stop signals. When a MIDI play signal is received,
the playback of the module resumes from the beginning, and the play signal is passed along to the MIDI outputs. When a MIDI
stop signal is received, the module stops playback and passes this signal along to the MIDI outputs.
Toolbox can also drive a clock signal to other modules in a few different ways. You can use the four MIDI outputs to output the
MIDI clock to other modules. You can also use a Gate Sequencer to configure your own custom clock signal that will go out the
corresponding Gate output jack. In this way you could create a repeating sequence of 1/16
All of the sequencers generate MIDI, Gate or CV signals, or some combination thereof, which are designed to drive other
modules. For example, the NOTE sequencer is a great source of a MIDI signal to drive Synthbox. Any module that can receive
CV, MIDI or Gate signals can work with toolbox to create new and creative sequences.
Each sequencer cell can follow the internal toolbox clock, use one of 4 gate inputs, or use one of 4 internally generated gate
signals. Set the Clk Source parameter for Note and Gate sequencers as described above to configure the clock signal to be used
by that cell.
5/5/2021 4:50:00 PM
Copyright 1010music LLC 2021
Toolbox User Manual v 2.1.2
th notes to generate an analog clock.
P. 38