Table of Contents
Advertisement
Preset Management
A preset is a set of pre-configured sequences, function generators and modulators. You can use the 1010music presets or
create your own presets to save your work.
Select a Preset
To select a preset:
1.
Press the HOME button to display the Main screen if needed.
2.
Cycle through the presets by touching the
either side of the name of the preset (e.g. STABS in Main Screen Overview above).
3.
Alternatively, you can touch the name of the preset or the space above it to display the
Preset Selection screen.
4.
Turn a Control Knob to select the desired preset.
Load
5.
Touch
to load the selected preset and go back to the Main screen.
Save a Preset
Toolbox does not automatically save your changes to presets. You have to manually save by following
these steps:
1.
From the Main screen, touch the preset name to display the Preset Selection screen.
Edit
2.
Touch
to display the Preset Edit Menu.
Save
3.
Touch
to save the changes to the preset and return to the Main screen.
Copy a Preset
If you prefer not to start with a blank slate, you can copy an existing preset.
1.
From the Main screen, touch the preset name at the top of the grid to display the
screen.
Edit
2.
Touch the
button at the top of the touch screen to display the
3.
Use a control knob to select the preset you want to copy, and then touch the
and displays the Main screen.
4.
Touch the preset name at the top of the grid to display the
Edit
5.
Touch the
button at the top of the touch screen to display the
SaveAs
button.
6.
Use the on-screen keyboard to change the name of the preset and then touch
the preset with the new name.
Rename a Preset
Here's how to give a preset a new name:
Presets
1.
From the
Preset Edit
display the
2.
Use a Control Knob to select the preset you want to rename, and then touch the
button. Toolbox displays a touch screen keyboard you can use to enter a new name. Touch
return
the
button to save the changes and go back to the
Delete a Preset
Follow these steps to delete a preset. Warning: there is no undo, and no prompt to ask "are you
sure?" So make sure you are on the correct preset before you use this. If you do accidentally delete a factory preset, you can
reload it from the factory image using the steps outlined in Manage WAV files and Preset files belowError! No bookmark name g
iven..
Edit
1.
Touch the
button at the top of the
2.
Use a Control Knob to select the preset you want to delete, and then touch the
immediately deleted.
5/5/2021 4:50:00 PM
+
–
and
buttons at the top of the Touch Screen on
Edit
screen, touch the
button at the top of the Touch Screen to
menu.
Presets
Copyright 1010music LLC 2021
Toolbox User Manual v 2.1.2
Presets
Preset Edit
Load
button. Toolbox loads the preset
Presets
screen.
Preset Edit
return
Rename
Presets
screen.
Edit
screen to display the
submenu.
Delete
Figure 1: Preset
Selection Screen
Figure 2: Preset Edit
Menu
menu.
menu, and then touch the
. Toolbox creates a copy of
Figure 3: Preset
Naming Keyboard
button. The preset is
P. 39
Advertisement
Table of Contents
