Satel TR49 Integration Manual page 58

RadioProperty SL@D?
RadioProperty SL@D=n
RadioProperty SL@E?
RadioProperty SL@F?
RadioProperty SL@M?
RadioProperty SL@M=x
RadioProperty SL@P?
RadioProperty SL@P=nnnnn
RadioProperty SL@R?
RadioProperty SL@S?
Get Tx delay (ms)
Set Tx delay (ms), n is [0...65535]
Get supported radio compatibility
modes.
Get noise level of radio channel
Get repeater function
Set repeater function. Values of x are:
"O" = Repeater function OFF
"R" = Repeater function ON
Get transmitter output power
Set RF output power (mW)
Valid values for nnnnn:
"10" for 10 mW TX power.
"20" for 20 mW TX power.
"50" for 50 mW TX power.
"100" for 100 mW TX power.
"200" for 200 mW TX power.
"500" for 500 mW TX power.
Get RSSI (Received Signal Strength
Indication) of last received message
(dBm)
Get radio compatibility mode
57
SATEL-TR49
Integration Guide, V 1.7
For example "0 ms" or "50
ms"
"OK" or "ERROR"
List of numbers, separated by
commas, showing the
supported modes:
0=SATELLINE-3AS.
"-xxx dBm"
"O" = Repeater OFF
"R" = Repeater ON
"OK" or "ERROR"
One of these values "10mW,
"20mW", "50mW", "100mW",
"200mW", "500mW"
"OK" or "ERROR"
"-nnn dBm", nnn is a decimal
value of field strength
between –80 dBm and –118
dBm.
Value is available 7 s after
reception, after that the
response is "<-118 dBm".
List of numbers, separated by
commas, showing the
supported modes:
0 = SATELLINE-3AS
1 = PacCrest-4FSK
2 = PacCrest-GMSK
3 = TrimTalk450s(P) (Rx fits
PacCrest modems)
4 = Trimtalk450s(T) (Rx fits
Trimble modems)
5 = PacCrest-FST
6 = 2ASxE
8 = SOUTH
20 = SATEL-8FSK-1 (FEC OFF)
21 = SATEL-8FSK-2 (FEC ON)
22 = SATEL-16FSK-1 (FEC ON)
23 = PacCrest-4FSK FEC Off
24 = PacCrest-GMSK FEC Off
25 = PacCrest-FST FEC Off
26 = PacCrest-4FSK FEC Off
Scrambler Off