Satel TR49 Integration Manual page 62

Slave Boolean
Security
RTS To CTS Uint8
Retry Uint8
Timeout
Repeaters Boolean
Master Uint8
Packet
Repeat
Max Slave Uint8
Retry
Retry Odds Uint8
Repeater Boolean
Frequency
Network ID Uint16
Slave / Boolean
Repeater
TX Subnet Uint8
RX Subnet Uint8
Serial port
settings
0 - 1 0: On
1: Off
0 - 2 0: Disabled
1: Enabled
8 - 255 8 - 255: Counter value when
connection is dropped
off if data is not received.
0: Disabled
1: Enabled
0 - 9 0 - 9: Defines how many times
master will send packets
0 - 9 0 - 9: Defines how many times
slave try to transmit data
if ack is not received
0 - 9 0 - 9: Defines a random base
when slave is trying to
resend data to master if Max
Slave Retry count is
reached. Value 0 means that
the slave's data
buffer is purged after Max
Slave Retry count is reached
0 - 1 0: Disabled
1: Enabled
0 - 4095 0 - 4095: Network ID for
multipoint networks.
Network ID 255 = Call Book
Mode
0: Disabled
1: Enabled
0 - 9, A - 0: Roaming
F 1 - E: Subnet ID
F: Disabled
0 - 9, A - 0: Roaming
F 1 - E: Subnet ID
F: Disabled
SL~E=M1,I12,A<Slave Security>
<RF Data Rate> = 2 (=High) or 3 (=Normal)
SL~E=M1,I13,A<RTS To CTS>
<RTS To CTS> = 0 (=Disabled) or 1
(=Enabled)
SL~E=M1,I14,A<Retry Timeout>
<Retry Timeout> = [8-255]
SL~E=M1,I15,A<Repeaters>
<Repeaters> = 0 (=Disabled) or 1
(=Enabled)
SL~E=M1,I16,A<Master Packet Repeat>
<Master Packet Repeat> = [0-9]
SL~E=M1,I17,A<Max Slave Retry>
<Max Slave Retry> = [0-9]
SL~E=M1,I18,A<Retry Odds>
<Retry Odds> = [0-9]
SL~E=M1,I19,A<Repeater Frequency>
<Repeater Frequency> = 0 (=Disabled) or
1 (=Enabled)
SL~E=M1,I20,A<Network ID>
<Network ID> = [0-4095]
Note: Network ID 255 = Call Book Mode
SL~E=M1,I21,A<Slave/Repeater>
<Slave/Repeater> = 0 (=Disabled) or 1
(=Enabled)
SL~E=M1,I22,A<TX Subnet>
<TX Subnet> = [0-9, A-F] as presented on
the left
SL~E=M1,I23,A<RX Subnet>
<RX Subnet> = [0-9, A-F] as presented on
the left
GET: SL%B?
SET: SL%B=
61
SATEL-TR49
Integration Guide, V 1.7