Satel TR49 Integration Manual page 59

RadioProperty SL@S=x
Reset SL@X=n
Change SL&M?
frequency band
Set radio compatibility mode. Value of
x is:
0 = SATELLINE-3AS
1 = PacCrest-4FSK (Option1)
2 = PacCrest-GMSK (Option2)
3 = Trimtalk450s(P) (Option 3, RX fits
PacCrest modems)
4 = Trimtalk450s(T) (Option 4, RX fits
Trimble modems)
5 = PacCrest-FST (Option5)
6 = SATELLINE-2ASxE
8 = SOUTH
20 = 8FSK FEC OFF (TR4 only)
21 = 8FSK FEC ON (TR4 only)
22 = 16FSK FEC ON (TR4 only)
23 = PacCrest-4FSK FEC Off (Scrambler
On)
24 = PacCrest-GMSK FEC Off
(Scrambler On)
25 = PacCrest-FST FEC Off
26 = PacCrest-4FSK FEC Off Scrambler
Off
27 = PacCrest-GMSK FEC Off Scrambler
Off
28 = PacCrest-4FSK FEC On Scrambler
Off
29 = PacCrest-GMSK FEC On Scrambler
Off
Reset command. Values of n are:
"9" Reset modem
Change frequency band. Choices are:
1=410-475 MHz
2=800 MHz (not yet supported)
3=902-928 MHz
58
SATEL-TR49
Integration Guide, V 1.7
27 = PacCrest-GMSK FEC Off
Scrambler Off
28 = PacCrest-4FSK FEC On
Scrambler Off
29 = PacCrest-GMSK FEC On
Scrambler Off
For example: "0,1" indicates
that the modem supports
Satel 3AS and PacCrest 4FSK
protocols.
"OK" or "ERROR"
"OK" or "ERROR", then
modem resets required
blocks.
"OK" or "ERROR"