Satel GSM LT-2 User Manual
  1. Manuals
  2. Brands
  3. Satel Manuals
  4. Control Unit
  5. GSM LT-2
  6. User manual
Satel GSM LT-2 User Manual

Satel GSM LT-2 User Manual

Communication module
Hide thumbs Also See for GSM LT-2:
Table of Contents

Advertisement

Quick Links

Download this manual
®
COMMUNICATION MODULE
GSM LT-2
USER MANUAL
Program version 2.12
gsmLT-2_en 10/10

Advertisement

Table of Contents
loading

Related Manuals for Satel GSM LT-2

Summary of Contents for Satel GSM LT-2

  • Page 1 ® COMMUNICATION MODULE GSM LT-2 USER MANUAL Program version 2.12 gsmLT-2_en 10/10...
  • Page 2 Never turn on power supply of the module and GSM telephone without external antenna connected. Making any construction changes or unauthorized repairs is prohibited. DECLARATION OF CONFORMITY Manufacturer: SATEL spółka z o.o. Product: LT-2 communications ul. Schuberta 79 module 80-172 Gdańsk, POLSKA...
  • Page 3 CONTENTS 1. GSM LT-2 .....................2 MODULE FEATURES 2. L ......................3 IMITATIONS OF USE 3. D ....................3 ESCRIPTION OF THE MODULE 4. O ..................5 PERATING THE TELEPHONE 5. I ........................5 NSTALLATION 6. O ..6 PERATION OF THE MODULE WITH ALARM CONTROL PANEL AND STATIONARY TELEPHONE 7.

  • Page 4: Gsm Lt-2 Module Features

    • Checking for presence of the module by CLIP test transmissions with acknowledgement of receipt. • GPRS monitoring, including the GSM LT-2 module status and/or control panel events (simulation of telephone monitoring station reading events in DTMF formats). • Answering the user CLIP (by means of a CLIP or SMS message).

  • Page 5: L Imitations Of Use

    GSM LT-2 SATEL Figure 1. Hooking up the module to telephone line. 2. L IMITATIONS OF USE As the mobile phones are designed for the maximum efficiency of speech conveyance, the data compression feature which is used in them brings about distortions in the transmitted audio signals, which may make difficult or even impossible sending modem signals through a simulated telephone line (downloading, monitoring).
  • Page 6 RS 232 INTERFACE +12V GND FLT R-1 T-1 RS-232 Figure 2. View of the GSM LT-2 module board. LEDs: The module indicates its status to the user by means of 4 LED indicators. The mode of lighting of the STAT and SIG LEDs depends on the module status and provides the information described below.

  • Page 7: I Nstallation

    As any other cellular telephone, the industrial cellular telephone requires a SIM activation card to operate. The user of the GSM LT-2 module has to obtain such a card on his own. The SIM card should be inserted into a special recess provided on the right-hand side of the printed circuit board.

  • Page 8: O Peration Of The Module With Alarm Control Panel And Stationary Telephone

    User manual GSM LT-2 SIM card 1. slide the card 2. turn the carrier aside and 3. press the carrier to the carrier up slide the card into the plate slide guides carrier down to fix it in position Figure 3. Entering the SIM card into its socket.

  • Page 9: Gsm Lt-2 With Monitoring Station

    GSM module located on the site (e.g. GSM-4S or GSM LT-2). Changing the status of the device inputs will result in sending the event as an SMS message with preprogrammed contents to the GSM module number on the monitoring station side.

  • Page 10: D Escription Of The Inputs

    8. I NPUTS The GSM LT-2 module is fitted with four inputs whose technical design is similar to that of the control panel zones. Support of the inputs consists in monitoring any changes of their status. Supervision of individual inputs can be bypassed by the module user. The inputs are supported by the module irrespective of the telephone line support (R-1, T-1).
  • Page 11 "hang up". 8.1.3 Remote bypassing – by SMS messages To have the remote control of the GSM LT-2 by SMS, it is necessary to program the module (from the R-1, T-1 terminals, or from a computer with the DLOAD10 program installed).

  • Page 12: M Essaging

    (function 81 makes it possible to program the content of SMS message informing about the status of inputs. Having received this message, the GSM LT-2 module will send an SMS with input status information to the selected number).

  • Page 13: Sms Messages

    The transmission acknowledgement of the CLIP service consists in the telephone user rejecting or receiving the connection set up by the GSM LT-2 module. The acknowledgement can only take place within 10 to 20 seconds of the connection set-up. In addition, the number of attempts (1–15) to make the transmission (functions 32 to 35) can be programmed...
  • Page 14 The telephone number, as programmed in the control panel, must consist of: 1. The "pager station number" preprogrammed in the GSM LT-2 module (function 6). 2. The cellular phone number to which the SMS message is to be sent. The required country code can be put before the main cellular phone number or it can be programmed by a function 114.
  • Page 15 The GSM LT-2 can store in its memory 62 alphanumeric characters to be sent as an SMS message. At an attempt to enter a longer message, the excessive portion of the text will be omitted.

  • Page 16: Program Version

    (TIP, RING) or through the RS-232 port. 11.2.1 Connection through TIP, RING terminals When connected to the control panel telephone output, the GSM LT-2 module will simulate the telephone monitoring station, i.e. the control panel will dial the monitoring station...

  • Page 17: M Odule Programming

    ROGRAMMING USING COMPUTER WITH PROGRAM The GSM LT-2 module is delivered together with the DLOAD10 program which enables the module to be programmed from a computer. The program is designed for IBM PC/AT compatible computers. It works in any computer hardware configuration in the WINDOWS (9x/ME/2000/XP/Vista) environment.
  • Page 18 User manual GSM LT-2 In order to establish communication between the DLOAD10 program and the module, you should follow the procedure below: 1. Open the window with module data by selecting File New device GSM4/LT module in the program menu (see: Fig. 7).
  • Page 19 SMS control, as well as the PIN code, are not programmed. The parameters programmable in the GSM LT-2 tab correspond to the control functions 1–42, 93, 94, 98, 99 and 111-114 and have been reviewed at the local control (DTMF) description in section Module Programming.
  • Page 20 Figure 10. 12.1.3 "GPRS/Monitoring" tab The GPRS monitoring function, supported by the GSM LT-2 module, is dedicated to interaction with monitoring stations which receive transmissions sent through TCP/IP (the STAM-2 monitoring station provided with the STAM-1 PE or STAM-1 RE card or any other monitoring station provided with the SMET-256 converter).
  • Page 21 SATEL Next, the parameters (obtained from the administrator of the given monitoring station) which enable communication between the GSM LT-2 module and the monitoring station are to be programmed: • Station address – IP address of the monitoring station. It can be entered in the form of a name or in the form of a number.
  • Page 22 User manual GSM LT-2 If the status of GSM LT-2 module is to be monitored, indicate the following: • monitoring station to which events will be sent (columns S1 and S2) • format of events sent in the GPRS transmission (column Format). The device supports two event formats: –...

  • Page 23: P Rogramming By Means Of A Telephone Set

    (without GPRS monitoring), as well as to check the module status, by using a stationary telephone connected to the R-1, T-1 terminals. In order to change the settings or check the status you should first enter the GSM LT-2 module programming mode. This operation requires entering a six-digit access code.
  • Page 24 User manual GSM LT-2 Where the number of digits is not precisely defined (e.g. a telephone number), such a parameter is described with the following symbol: [?...]. The numbers of telephones/PAGER stations may contain special characters: #, * , +. In order...
  • Page 25 GSM LT-2 SATEL [?][?][?][?][?][?]=gggg. (password, equality sign, telephone number, dot). Using DTMF signals it is possible to program a password comprised of digits only (0...9), while using the DLOAD10 program you can program a password comprised of both letters and digits.
  • Page 26 User manual GSM LT-2 1 – transmission enabled. [1][2][ * ][ * ][?][?][?][?][?][?][#] – access code (6 digits) for programming the module by means of a telephone set (connected to the R-1, T-1 terminals). The [1][2][ * ][ * ][#] sequence will delete the code i.e.
  • Page 27 GSM LT-2 SATEL [1][7][ * ][ * ][?][#] – deenergizing the telephone line together with signaling fault at the FLT output: 0 – do not switch off voltage on telephone line terminals, 1 – switch off voltage on telephone line if FLT is active (programming mode –...
  • Page 28 User manual GSM LT-2 0 – no, 1 – yes. When the default settings are restored (function 13), the random transmission will be disabled. Programming zeros only will reset the test transmission. [2][6][ * ][ * ][?...][#] – telephone number to confirm SMS control. The number to which the module will send an SMS to inform about the current settings, provided that the user has changed the settings by means of an SMS.
  • Page 29 GSM LT-2 SATEL [3][9][ * ][ * ][?][#] – kind of CLIP messaging to telephone no. 4. The same settings as for telephone 1. [4][0][ * ][ * ][#] – contents of SMS sent in case of no acknowledgement (default content of these SMS messages can only be changed by means of the DLOAD10 program).
  • Page 30 User manual GSM LT-2 [5][8][ * ][ * ][??...][#] – bypassing time, input IN2. The same settings as for input IN1. [5][9][ * ][ * ][??...][#] – bypassing time, input IN3. The same settings as for input IN1. [6][0][ * ][ * ][??...][#] – bypassing time, input IN4. The same settings as for input IN1.
  • Page 31 GSM LT-2 SATEL [7][5][ * ][ * ][??????][#] – SMS code (6 alphanumeric characters) used for bypassing all inputs. Using the DTMF tone signaling makes it possible to program the SMS content only composed of digits (0–9). The DLOAD10 program enables creating SMS messages of any content.
  • Page 32 User manual GSM LT-2 − establish connection (if an inputs/outputs control code has been programmed) to enable remote control. During the "calling time" the module will transmit the bell signal to the terminals R-1, T-1 and connection can be established from the telephone connected to the extension line.
  • Page 33 GSM LT-2 SATEL [9][9][ * ][ * ][7][8][9][0][[#] – test mode of the module. Calling this function will make all the indicator LEDs go out. Then they will light up for approx. 1 second in the following sequence: STAT, SIG, TX, RX, and next the FLT output will be activated.

  • Page 34: S Pecifications

    Current-carrying capacity, FLT output................50 mA Weight..........................220 g ATTENTION: The SATEL Company recommends that performance of the GSM LT-2 communication module be regularly tested. An efficient GSM module, which interacts with the security system, greatly increases the chance of successful transmission of alarm information.
  • Page 35 IMPORTANT: PIN......... PUK................Telephone No..........................................................................................................................
  • Page 36 SATEL sp. z o.o. ul. Schuberta 79 80-172 Gdansk POLAND tel. + 48 58 320 94 00 info@satel.pl www.satel.eu...

Table of Contents