Satel TR49 Integration Manual page 55

ChannelList SL$S=<selection>
DataPort SL%B?
DataPort SL%B=a,b,c,d
DataPort SL%L?
DataPort SL%L=n
Memory SL**>
Memory SL*R>
ModemInfo SL!H?
ModemInfo SL!V?
ModemInfo SL%1?
ModemInfo SL%1="data"
ModemInfo SL%2?
ModemInfo SL%2="data"
ModemInfo SL%3?
ModemInfo SL%3="data"
ModemInfo SL%4?
Set channel scanning mode. Selection:
S0 = Stop scanning (supported only by
TR3/TR4/TR8)
S1 = Starts Scanning RSSI values of the
channels in the Channel list
(supported only by TR3/TR4/TR8)
S2 = Start searching transmission
(supported only by TR3/TR4/TR8)
1 = Scan channels one by one and save
RSSI readings to memory (supported
only by TR1 based products)
Get serial data parameters
Set serial data port parameters.
a= "115200", "57600", "38400",
"19200", "9600", "4800", "2400" or
"1200" (defines baud rate)
b="8" (defines character length)
c= "N", "O" or "E" (defines parity)
d= "1" (defines number_of_stop bits)
Get Pause length
Set Pause length
Save current settings as permanent
settings
Restore settings to their factory set
values
Get hardware info
Get product/variant info
Get arbitrary data stored in memory
location 1
Set arbitrary data (max 25 characters)
in memory location 1
Get arbitrary data stored in memory
location 2
Set arbitrary data (max 25 characters)
in memory location 2
Get arbitrary data stored in memory
location 3
Set arbitrary data (max 25 characters)
in memory location 3
Get arbitrary data stored in memory
location 4
54
SATEL-TR49
Integration Guide, V 1.7
"OK" followed by
channel/RSSI info
See a separate description for
more details
Baud rate, character length,
parity, number of stop bits
(for example "38400, 8, N, 1")
"OK" or "ERROR"
decimal number
decimal number
"OK" or "ERROR"
"Factory defaults restored!"
or "ERROR"
"HW:nnnnn"
Depending on variant, for
example "SATEL-TR49"
If empty data is stored,
response = "Undefined",
otherwise data and carriage
return
"OK" or "ERROR"
If empty data is stored,
response = "Undefined",
otherwise data and carriage
return
"OK" or "ERROR"
If empty data is stored,
response = "Undefined",
otherwise data and carriage
return
"OK" or "ERROR"
If empty data is stored,
response = "Undefined",
otherwise data and carriage
return