Webasto AT2000STC Installation Manual page 20

Webasto Air Top Installation Guide – AT2000STC
Turn the Control Knob to choose the desired heating mode
Options available: Eco (Power Saving Mode); Normal (Comfort Heating); Boost (Rapid Heat)
Press the Control Knob to confirm selection
NOTE: Eco and Boost modes are not available for the AT2000STC
Turn the Control Knob in order to choose the desired temperature
(Temperature range: 5 ‐ 35⁰C)
Press the Control Knob to confirm selection
The programmed timer is saved and shown on the display
Press the Control Knob to activate the programmed time
"Activate" message will appear on the display
Repeat the process to add timers (3 timer settings per day, 21 per week)
10.3 Altitude Function Activation
Altitude function can be switched on when operating the heater at higher altitudes (>1,500m to 2,200m).
The menu element "Settings" has been chosen.
Press the control knob to select the altitude function.
'Off' is preset
Press the control knob to select the altitude function.
When altitude function is active, the altitude symbol
Note: The altitude function must be switched off manually when it is no longer required.
Air Top 2000STC Installation Guide 2020 | Webasto Thermo & Comfort Australia Pty Ltd.
20
is shown at the top left in the main menu.