Webasto Air Top Installation Guide – AT2000STC
If your heater was not selected correctly at Initial Start‐Up a Manual Reset is required.
Press the On/Off Button to go to the Main Menu Screen and follow the following steps.
Select the symbol "Settings"
Press the Control Knob
The "Quick Start" menu is displayed
Turn the Control Knob clockwise 10 times until "Reset" is displayed
Select "Reset" by pressing the Control Knob
Press the Control Knob to confirm.
The Control Knob is now restarted
During the restart of the Control Knob, an Hourglass will quickly appear
Press the Control Knob and the On/Off Button simultaneously for 3 seconds
The Control is now ready for use.
Select your Heater (Note: AirTop Evo 40/55 is displayed as AT 40/55)
Press the Control Knob
Air Top 2000STC Installation Guide 2020 | Webasto Thermo & Comfort Australia Pty Ltd.
18