Webasto Air Top Installation Guide – AT2000STC
4.4 Fuel Line
Only Webasto supplied Fuel Line should be used for the fuel delivery to the heater. Use of any other fuel line will
result in malfunction of the heater and will void warranty. To ensure correct connections, rubber hose connectors,
10 mm hose clamps and fuel line are supplied in the kit.
Fig 24 – Installing fuel extracting device ‐ Bottom Mount
In case you are not able to use the stand pipe shown Fig 21 (Top mount type), Webasto can supply another option
(Fig 24 bottom mount type).
On some motor‐home vehicle chassis' an additional factory fuel spigot may be available at the fuel sender unit,
Webasto can supply a connection kit (Fig 25) to suit therefore eliminating the need for a stand‐pipe or pick‐up.
Fig 25 – Optional SAE Connector for installing on an
additional factory fuel spigot
Air Top 2000STC Installation Guide 2020 | Webasto Thermo & Comfort Australia Pty Ltd.
13