Webasto Air Top Installation Guide – AT2000STC
10.2 Timer Set‐Up
It is possible to program the Timer Setting 7 days in advance. The heater switches on automatically at the
programmed time. Up to 3 time settings per day can be set, with a total of 21 time settings for the week.
Before the timer can be activated, make sure that the:
∙ Time and current day of the week are set,
∙ Heater is switched off
∙ "Timer" symbol has been selected in the main menu
Press the Control Knob
"Add Timer" screen is displayed
Press the Control Knob in order to add a new timer
Turn the Control Knob to select chosen "Day"
Press the Control Knob to confirm selection
Turn the Control Knob to choose the desired Switch On time (Hour)
Press the Control Knob to confirm
Turn the Control Knob again to choose the Minutes
Press the Control Knob to confirm
Turn the Control Knob to choose the desired Switch OFF time (Hour)
Press the Control Knob to confirm
Turn the Control Knob again to choose the Minutes
Press the Control Knob to confirm
Select the "Heating" operation mode from the Main Menu screen
Air Top 2000STC Installation Guide 2020 | Webasto Thermo & Comfort Australia Pty Ltd.
19