Webasto Air Top 2000 ST Operating Instructions Manual

Webasto Air Top 2000 ST Operating Instructions Manual

Hide thumbs Also See for Air Top 2000 ST:

Advertisement

Operating Instructions

Air Top 2000 ST
Introduction
Dear Webasto Customer,
Thank you for choosing the Webasto Air Top 2000 ST air heater.
The Air Top 2000 ST heater is used
– to heat cabins, boats, trucks, minibuses, vans and motor-homes and
– to defrost vehicle windows.
We presume that the principle and mode of operation of your new heater has
been explained to your complete satisfaction by the workshop/service center
which installed the heater. In these operating instructions we would like to
once again provide you with an overview of the safe use of the Air Top 2000
ST heater.
Repair or maintenance work not described here may only be carried out by an
authorized Webasto dealer.
Servicing and Safety Instructions
1. When heater is in use, the surface of the hot air outlet will become hot to the touch.
Contact with skin may cause burns.
2. Webasto heaters must be switched "off" when re-fueling at filling stations and/
or while loading or unloading flammable materials for transport, to prevent the
risk of explosion. Please review the owner's manual for safety and use
instructions.
3. The year in which the heater was used for the first time must be permanently displayed
on the factory plate by deleting the inapplicable years from the plate.
4. The heaters are not designed for heating hazardous substance transport
compartments.
5. Claims can only be made if it can be verified that the claimant has complied with the
servicing and safety instructions.
6. The heater may not be operated in enclosed spaces (such as garages) as a result
of the risk of poisoning and asphyxiation, even if a timer or Telestart remote is
used.
7. The heater must be checked by an expert at the latest at the start of the cold weather
period.
8. In the event of long-lasting heavy smoke development, unusual combustion noises or a
smell of fuel or if the heater suffers continuous fault cut-outs with error messages
(flashing code), it must be shut down by removing the fuse and must not be reused until
it has been inspected by Webasto-trained personnel.
9. Wherever inflammable vapors or dust may form, the heater must be switched off
as a result of the risk of explosion.

Advertisement

Table of Contents
loading

Summary of Contents for Webasto Air Top 2000 ST

  • Page 1: Operating Instructions

    Air Top 2000 ST Introduction Dear Webasto Customer, Thank you for choosing the Webasto Air Top 2000 ST air heater. The Air Top 2000 ST heater is used – to heat cabins, boats, trucks, minibuses, vans and motor-homes and – to defrost vehicle windows.
  • Page 2 If exhaust lines pass through areas used by personnel, they must also be replaced by genuine spare parts after ten years. 11. The fuel specified by the vehicle manufacturer is suitable for use in the Air Top 2000 ST B (gasoline).
  • Page 3: Ventilation Option

    Control Element Changes to the settings on the control element will be carried out with a time delay Rotary knob for: - Switching on and off - Setting the room temperature - Resetting after a fault cut-out Indicator/error code display Switch On Set the rotary knob on the control element to the desired temperature.
  • Page 4 SmarTemp Control 2.0 LCD Screen Symbol Legend Heater ON Example Press the Webasto button to turn heater on. Set Temperature Output & Heater Runtime Example Using the rotary dial and the selection button, follow these steps to set your cab temperature to 70°F with a runtime of 4 hours.
  • Page 5 Set Timer Example Set timer to turn on Friday at 6:30AM with a runtime of 60 minutes. Press the Selection button. Using the rotary dial, select Timer. Highlight the timer feature, press the Selection button. Select “edit” from the sub-menu. Adjust and select day for Friday.
  • Page 6 12 hour Time & Date button. 12 (AM / PM) or 24 hour available. The Webasto button can be used to go back to the previous field if additional changes are needed. Depending on the installation location, the temperature 0°...
  • Page 7: Actions In Event Of Faults

    If an error occurs, first check the fuse and plug connections to ensure that they are in proper condition and connected correctly. If the actions described below do not rectify the error, have the heater checked by Webasto- trained personnel.
  • Page 8: Error Code Output On Combination Timer Or Control Element

    Error code output on combination timer or control element If the system is fitted with a combination timer, when an error occurs an error code is output on the timer's display until the heater has been rectified. The error code is output if the heater is fitted with a control element after an error has oc- curred by the switch-on indicator/error code indicator flashing.
  • Page 9: Heater Lockout Reset Procedure

    IMPORTANT: Heater fault codes can be read using PC Diagnostics, however, the heater lockout reset must be manually performed using the procedure stated above. If you have any questions, contact our technical support team at (800) 860-7866 or via email at: info-us@webasto.com.
  • Page 10 Webasto Thermo & Comfort N.A., Inc 15083 North Road Fenton, MI 48430 Technical Assistance Hotline USA: (800) 860-7866 Canada: (800) 667-8900 www.webasto.us www.techwebasto.com Org. 5/2015 Rev. 11/2015 P/N: 9010302-USA...

Table of Contents