Preparation For Use And Operation; Operating And Indicator Elements; The Front - Fujitsu PRIMERGY RX300 S3 Operating Manual

5 Preparation for Use and
Operation
V
CAUTION!
Please note the safety instructions in
page 23.
5.1

Operating and Indicator Elements

5.1.1

The Front

The operating and indicator elements on the front side are show in
page 50.
Operating elements
ON/OFF button
When the system is switched OFF, it can be switched ON again by
pressing the ON/OFF button. When the system is operating,
pressing the ON/OFF button will switch OFF the system.
I
NMI NMI button
I
RST Reset button
Pressing the reset button reboots the system.
RX300 S3
The ON/OFF button does not disconnect the server from the
mains. To disconnect from the mains completely, remove the
power plug(s).
Please do not press! The NMI button may only be used by
Service.
Operating manual
chapter "Important Notes" on
figure 13 on
49