Edp/Display Cable; Removing The Edp/Display Cable - Dell Precision 3560 Service Manual

Steps
1. Align and place the camera/microphone module into the slot on the display back cover.
2. Connect the camera/microphone cable to the connector on the camera/microphone module.
Next steps
1. Install the display panel.
2. Install the display hinges.
3. Install the display bezel.
4. Install the display assembly.
5. Install the base cover.
6. Install the microSD card.
7. Install the SIM card.
8. Follow the procedure in

eDP/display cable

Removing the eDP/display cable

Prerequisites
1. Follow the procedure in
2. Remove the SIM card
3. Remove the microSD
4. Remove the base cover.
5. Remove the display assembly.
6. Remove the display bezel.
7. Remove the display panel.
About this task
The following images indicate the location of the eDP/display cable and provide a visual representation of the removal
procedure.
78 Removing and installing components
After working inside your
Before working inside your
card.
computer.
computer.