Dummy Sim-Card Slot Filler; Removing The Dummy Sim-Card Slot Filler - Dell Precision 3560 Service Manual

About this task
The following images indicate the location of the display back cover and provides a visual representation of the installation
procedure.
Steps
Place the display back cover on a flat surface.
Next steps
1. Install the display hinges.
2. Install the sensor board.
3. Install the eDP/display
4. Install the camera/microphone
5. Install the display panel.
6. Install the display bezel.
7. Install the display assembly.
8. Install the base cover.
9. Install the microSD card.
10. Install the SIM card.
11. Follow the procedure in

Dummy SIM-card slot filler

Removing the dummy SIM-card slot filler

Prerequisites
1. Follow the procedure in
2. Remove the SIM card.
3. Remove the microSD
4. Remove the base cover.
5. Remove the WLAN card.
6. Remove the WWAN card.
86 Removing and installing components
cable.
module.
After working inside your
Before working inside your
card.
computer.
computer.