Installing the infrared camera
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the infrared camera and provides a visual representation of the installation
procedure.
Steps
1. Align and place the infrared camera module into the slot on the display back cover.
2. Connect the infrared camera cable to the connector on the camera module.
3. Adhere the tape to secure the infrared camera cable in place.
Next steps
1. Install the
display
hinge.
2. Install the
display
panel.
3. Install the
display
bezel.
4. Install the
display
assembly.
5. Install the
WWAN
card.
6. Install the
Wireless
card.
7. Install the
base
cover.
8. Install the
microSD
card.
9. Install the
SIM
card.
10. Follow the procedure in
eDP/display cable
Removing the eDP/display cable
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
105