Installing The System Fan - Dell Precision 3560 Service Manual
Hide thumbs
Also See for Precision 3560:
- Owner's manual (71 pages) ,
- Setup and specifications (25 pages) ,
- Setup and features information (8 pages)
Table of Contents
Advertisement
4. Remove the
base
cover.
5. Remove the battery.
About this task
The following images indicate the location of the system fan and provide a visual representation of the removal procedure.
Steps
CAUTION:
Do not damage the thermal fan sponge during any replacement procedures. Damaging the sponge
reduces the effectiveness of the heat dispersion.
1. Disconnect the system-fan cable from the system board.
2. Remove the two screws (M2x3) that secure the system fan to the palm-rest assembly.
3. Lift the system fan, along with its cable, off the palm-rest assembly.
Installing the system fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the system fan and provide a visual representation of the installation procedure.
Removing and installing components
45
Advertisement
Table of Contents
Need help?
Do you have a question about the Precision 3560 and is the answer not in the manual?
Questions and answers