System Fan; Removing The System Fan - Dell Precision 3560 Service Manual

About this task
The following image indicates the location of the LED board and provides a visual representation of the installation procedure.
Steps
1. Align the screw hole on the LED board with the screw hole on the palm-rest assembly.
2. Replace the single screw (M2x3) to secure the LED board to the palm-rest assembly.
3. Route the LED-board cable and connect the cable to the connector on the system board.
4. Route the smartcard reader cable on the palm-rest assembly.
5. Connect the smartcard reader cable to the connector on the USH-daughter board and close the latch.
Next steps
1. Install the assembly inner
2. Install the battery.
3. Install the WWAN card.
4. Install the WLAN card.
5. Install the base cover.
6. Install the microSD card.
7. Install the SIM card.
8. Follow the procedure in

System fan

Removing the system fan

Prerequisites
1. Follow the procedure in
2. Remove the SIM card.
3. Remove the microSD
44 Removing and installing components
frame.
After working inside your
Before working inside your
card.
computer.
computer.