Table 1. Precision 3560 screw list (continued)
Component
Display hinge
Display panel
Subscriber Identity Module (SIM) card
Removing the SIM card
Prerequisites
1. Follow the procedure in
NOTE:
SIM card or SIM card tray removal is only available on systems that are shipped with WWAN module. The procedure
for removal is only applicable for systems that are shipped with a WWAN module.
CAUTION:
Removing the SIM card with the computer turned on, may cause data loss or damage to the card.
Ensure that your computer is turned off or the network connections are disabled.
About this task
The following images indicate the location of the SIM card and provide a visual representation of the removal procedure.
Screw type
M2.5x3.5 (display hinge to
display back cover)
M2.5x3.5
Before working inside your
Quantity
4
4
computer.
Removing and installing components
Screw image
15