Installing Camera; Display (Edp) Cable; Removing Display Cable - Dell P101F Service Manual
Hide thumbs
Also See for P101F:
- Setup and specifications manual (23 pages) ,
- Setup and specifications manual (43 pages)
Table of Contents
Advertisement
Installing camera
About this task
Steps
1. Insert the camera into the slot on the display back cover .
2. Connect the camera cable to the connector on the camera module.
Next steps
1. Replace the
display
panel.
2. Replace the
display
bezel.
3. Replace the
display
assembly.
4. Replace the battery.
5. Replace the
base
cover.
6. Replace the
SD
card.
7. Follow the procedure in
Display (eDP) cable
Removing display cable
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
display
assembly.
6. Remove the
display
bezel.
7. Remove the
display
panel.
8. Remove the camera.
after working inside your
before working inside your
computer.
computer.
Disassembly and reassembly
77
Advertisement
Table of Contents
