Installing The Edp/Display Cable - Dell Precision 3560 Service Manual
Hide thumbs
Also See for Precision 3560:
- Owner's manual (71 pages) ,
- Setup and specifications (25 pages) ,
- Setup and features information (8 pages)
Table of Contents
Advertisement
Steps
1. Disconnect the eDP/display cable from the connector on the camera/microphone module.
2. Peel the conductive tape and unroute the eDP/display cable to release it from adhesive and lift the eDP/display cable from
the display back cover.
Installing the eDP/display cable
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the eDP/display cable and provides a visual representation of the installation
procedure.
Removing and installing components
79
Advertisement
Table of Contents
