Personal Protective Equipment; Information Of The Machine Manufacturer; Obligations Of The Machine End-User - Bosch rexroth IH04E Assembly Instructions Manual

Press module for die cushion
Table of Contents

Advertisement

2�7 Personal protective equipment
During maintenance work as well as during installation and removal of the press
module type IH04E, always wear the following personal protective equipment:
• Heat- or cold-resistant protective gloves
• Ear protection
• Safety shoes
• Perfectly fitting safety goggles
• Protective helmet
2�8 Information of the machine manufacturer
The machine manufacturer must provide the following information:
• The intended use for which the machine is designed
• The frequency of inspection and functional testing of the non-separating guards
and the indicators
• The necessary maintenance of the guarding
• The procedures required for maintenance and/or repair, especially if guarding
has been rendered ineffective
• A list of safety-relevant components, which must not be modified or replaced by
the machine end-user
• The intervals for the replacement of safety-relevant components
• The frequency of checking for external leakage
• The frequency and procedure for testing the function of the hydraulic system
to detect internal leakages
• The maximum weight and the maximum dimensions of the tools which may used
for the press
2�9 Obligations of the machine end-user
The machine end-user of the press must provide training for personnel on a regular
basis regarding the following subjects:
• Observation and use of the machine manufacturer's operating instructions and
the legal regulations
• Observation of the intended operation (incl. maintenance) of the press module
type IH04E
• Observation of factory security officers' instructions and operating instructions
of the machine end-user
• Behavior in case of emergency
• Effects of an emergency stop, how to free a person who has become entrapped
in the die area, in particular as a result of bypassing or misuse of the safety
equipment or after an emergency stop has been triggered, see EN 289, par. 7.2.3
Safety instructions | Press module Type IH04E
RE 63129-MON, Edition 09.2022, Bosch Rexroth AG
15/48

Advertisement

Table of Contents
loading

Table of Contents