Table of Contents
Advertisement
Contact with salt water leads to increased corrosion at the safety valve. Thus,
mounting screws and plug screws as well as movable components may be
chemically corroded and damaged. So take suitable corrosion protection
measures.
2.7 Personal protective equipment
The machine end-user must provide the personal protective equipment (such as
gloves, working shoes, safety goggles, working clothes, etc...).
2.8 Obligations of the machine end-user
The operator of the Bosch Rexroth safety valve is responsible that the safety valve is
only used according to the intended use as defined in these operating instructions.
• the operating personnel are instructed at regular intervals.
• a danger zone is marked, if required.
• the safety measures for their specific area of application of the safety valve are
complied with.
• the safety valve is only stored, operated and maintained according to the Technical
data, operating and environmental conditions indicated in these operating
instructions, in particular that the limit values indicated in the Technical data are
not exceeded.
If leakage at the valve can lead to water or soil contamination, the valve must be
put into a suitable collecting pan.
The operation of installations, systems and machines basically requires the
IT-Security
implementation of a holistic IT security concept which is state-of-the-art in terms
of technology. Accordingly, Bosch Rexroth products and their properties must be
considered as components of installations, systems and machines for their holistic
IT security concept.
Unless otherwise documented, Bosch Rexroth products are designed for operation
in local, physically and logically secured networks with access restrictions for
authorized persons, and they are not classified according to IEC 62443-4-2.
Safety instructions
RE 25402-B/10.21, DBD...1X/..E, Bosch Rexroth AG
15/56
Advertisement
Table of Contents
