Selecting The Cycle - Hanseatic HWMB814B User Manual

Selecting the cycle

NOTICE
Always select the cycle before loading the washing machine. Otherwise, the loading
sensor will not work.
1. Press the button (8) to switch the appli-
ance on.
All symbols on the display will illuminate
briefly. Then only the symbols and values
for the selected cycle will illuminate.
2. Choose the correct cycle for your laundry
from the cycle table on page EN-12 or
page EN-13 and select it using the cy-
cle selector (2).
3. If necessary, customise the selected cycle
to suit your laundry by adjusting the de-
fault settings using the buttons:
Selecting the cycle
(2) (3) (4)
Startzeit-
vorwahl
Temperatur-
wahl
U/Min /M M M
(11)
– 'Temperature selection' (3),
– 'Start time pre-selection' (4),
– 'Time saving' (6),
– 'Extra rinse' (7),
– 'Pre-wash' (10)
– 'RPM' (11)
Please see 'Table: Further options' on
page EN-14 for the available custom
settings.
Page EN-15
(6) (7) (8)
3 Sek. drücken für Individuell
Zeit sparen
Ein/Aus
Extra
Spülen
Vorwäsche ä äs
Start/Pause
3 Sek.
Tür Entriegelung
(10)