Water Connection Diagram - Hanseatic HWMB814B User Manual

Page EN-32 Set-up and connection

Water connection diagram

~ 95 cm
Creating a water drain
CAUTION!
Risk of scalding!
The suds can become very hot and may
cause burns upon contact.
Securely attach the water drain hose
■
to a drain or bath to prevent it from
slipping due to the recoil caused by
pumping.
For drains, make sure that the cross
■
section of the discharge pipe is great
enough that the drain cannot over-
fl ow.
NOTICE
Risk of damage!
Improper handling of the appliance
can lead to water damage.
Do not extend the water drain hose
■
or replace it with another hose.
Make sure that the water drain hose
■
is not kinked or twisted.
Make sure that the curvature of the
■
water drain hose is at least 60 cm
~ 95 cm ~ 140 cm
~ 150 cm
(max. 100 cm) above the ground to
ensure the water drainage functions
perfectly.
Ensure that the water drain hose is
■
in the retaining clips on the back of
the appliance so that the curvature
always remains above the waterline.
Make sure that the end of the hose is
■
not submerged in the pumped water.
The water drain hose (14) can be secured in
two ways:
– Fixing with a hose holder for self-installa-
tion.
– Fixing to an appliance connection nozzle
directly on the siphon by a specialist.
Fixing with a hose holder
• Put the end of the water drain hose (14)
over a hose holder (not included in pack-