Automatic Control Functions; Foam Detection; Overflow Protection System; Dynamic Quantity Control - Hanseatic HWMB814B User Manual

Automatic control functions

The following functions run automatically. You
cannot change them.

Foam detection

The electronic foam detection makes sure
that more water is added to the first rinse cy-
cle for certain amounts of foam.

Overflow protection system

This system prevents the water from leaking
out over the dispensing drawer. As soon as
a certain water level is exceeded, the outlet
pump will automatically switch on.
Automatic control functions

Dynamic quantity control

If your washing machine is only loaded up to
half of the maximum capacity, the water con-
sumption and cycle duration will reduce for
certain cycles. Adjust the detergent dosage
accordingly.

Imbalance correction system

This system protects your washing machine
in the event of an imbalance that is too large
when spinning starts. This can happen with
small loads or with large individual pieces of
laundry. The laundry is distributed again and
the spin speed increased if the laundry distri-
bution is right.
Page EN-25