Page EN-20
Operation: Standard cycles
Operation: Standard cycles
(1)
Before getting started
• First read chapters "Intended use" and
"Safety notices" (see page EN-5 and the
following).
• Remove the transport safety devices and
prepare the appliance as described in
chapter "Installation, connection and initial
commissioning" (see page EN-34).
• Properly attach the water inlet hose (30)
and the water outlet hose (17).
Selecting the cycle
NOTICE
Always select the cycle before loading
the washing machine. Otherwise the
loading sensor will not work.
The cycle table shows you the cycle which is
suitable for your laundry (see tables "Stand-
ard cycles" on page EN-13; for information on
the "Custom" cycle, see page EN-25).
(2)
Express 15'
Hygienepflege
ECO 40-60
Wolle
Bettwäsche
Spülen
Babybekleidung
Schleudern
20°C
Trommelreinigung
(2)
Express 15'
Hygienepflege
ECO 40-60
Wolle
Spülen
Schleudern
Trommelreinigung
1. To switch on the appliance, press the
(5) button.
All symbols/fields in the display (3) will illu-
minate briefly; then there will only be three
lines visible.
(i)
2. Select the cycle using the cycle selector (2).
The display (3) shows the symbols for the
sequence (a) of the current cycle and its
standard values in the line (i). Such stand-
ard values include the cycle time, current
water temperature and spin speed.
Example cycle: "Cotton"
Degree of soiling
Cycle time in hr/min
Washing water temperature
Spin speed
(3)
(4) (5) (6)
Start/Pause
Zeit
Startzeit
sparen Temp/
U/Min/
Funktion
-Vorwahl
(13)
(12)
(11)
(10)
(9)
(8)
(3)
Startzeit
Zeit
sparen Temp/
U/Min/
Funktion
-Vorwahl
(a)
Ein/Aus
3 Sek. Tür
Entriegelung
(7)
(5) (6)
Ein/Aus
Start/Pause
3 Sek. Tür
Entriegelung
03:39
40
14
00