Selecting And Starting Cycle With Sub-Cycle - Hanseatic HWM714A3D User Manual

Selecting and starting cycle
with sub-cycle
This section refers to the 'Easy Care', 'Wool'
or 'Extras' cycles. These have two and/or
four sub-cycles. One further operating step
is therefore required to start them.
Cycle Sub-cycle
1 Synthetics
Easy Care
2 Curtains
1 Wool (Delicates)
Wool
2 Silk
1 Rinse
2 Spin
Extras
3 Drain
4 Drum cleaning
(5)
Baumwolle
e
Speicher II Baumwolle
Speicher I
Eco 20°C
Nachtwäsche Pflegeleicht
Hemden
Wolle
Sport Mix
Kurz 60' Extras
Extrakurz 12' Allergie
(10)
1
Spülen
1. Set the cycle selector (5) to the desired
cycle.
The corresponding LED flashes.
The display (6) shows the name of the
first sub-cycle (e.g. 'Extras' '1 Rinse').
TIME
e
60° C
e
40° C
0 30 :
Using standard cycles
1
Spülen
2. Select the desired sub-cycle by pressing
the button below the symbol > as many
times as necessary until the desired
sub-cycle appears on the display.
3
3
Entwässern
3. To save your selection, press the button
below the symbol →.
9O° 1400 - -
Waschen...
4. Press the button
The 'Padlock' symbol shortly appears at
the 'Locked' position
cle begins. The display shows the remain-
ing cycle time, as well as the progress of
the wash cycle: Wash, rinse, spin. After
the cycle has finished, 'End' will appear
on the display.
Seite EN-17
0 30 :
0 03 :
0 03 :
(7)
2
3 09 :
(7).
and the wash cy-