Menu Code 63 (Handle Masking); Menu Code 64 (Low Priority - Cng Only) - Bennett Natural Gas Series Operator's Manual

Table of Contents

Advertisement

How to Program the Dispenser for Operation
This mode is used to enable or disable handle masking.
There are two options for this code:
0 - Disable Handle Masking (Default)
1 - Enable Handle Masking
1. After the manager's mode has been accessed, press
the numbers 6 and 3, then the MODE button on the
keypad. The price display shows the dispenser is in
Menu Code 63 (See figure 63.3).
2.
Handle masking may be enabled or disabled. If a
POS will not authorize a dispenser with an active han-
dle this mode will need to be set to 1. If this mode is
set to 0 the dispenser will report an activated handle
immediately.
3. Once a selection has been made press the ENTER
button on the keypad to save the selection in program-
ming.
How to Configure a Low Priority Dispenser
Menu Code 64 is used to configure a CNG dispenser to
be 'low priority', typically a dispenser used to fill large
tanks. When a dispenser is programmed as a 'low priority'
the fill process is temporarily paused when a customer
has started a standard fill on another dispenser. The filling
process on the 'low priority' dispenser will resume when
the standard fill is complete.
Note:
Once the 'low priority' fill is complete, the handle
does not have to be lowered to end the sale but
the handle must be lowered and raised again to
start a new 'low priority' fill.
There are two options for this code:
0 - Standard CNG Dispenser (Default)
1 - Low Priority Dispenser
1. After the manager's mode has been accessed, press
the numbers 6 and 4 then the MODE button on the
keypad. The price display shows the dispenser is in
Menu Code 64 (See figure 64.1).
If the dispenser has not been programmed since it
came from the factory, the number 0 appears in the
main display. See Figure 64.1. This is the default
setting.
2. Press the 1 button on the keypad to enable a low pri-
ority dispenser.
Continued on the next page...
How to Set the Handle Masking
Menu Code 63
Menu Code 64
49
Handle ind
COdE
63
LOPrI
dISP 0
COdE
64
LOPrI
dISP 1
COdE
64
123919 Rev C 5-17-18
0
Figure 63.3
Figure 64.1
Figure 64.2

Advertisement

Table of Contents
loading

Table of Contents