Table of Contents
Advertisement
Certification
6.1.2 CSA/Sira
The device is marked with a CSA symbol that indicates compliance with both Canadi-
an and U.S. requirements.
C
It is specifically approved for use in hazardous locations defined as:
•
•
•
6.1.2
CSA/Sira
This device meets the requirements of the following CSA/Sira standards and is ap-
proved for use in hazardous locations under certificates Sira 16ATEX4088X and IECEx
CSA 16.0021X:
•
•
•
The device is marked with an ATEX marking.
Note
For the maximum ambient temperature, refer to the hazardous location label affixed
to the device.
6.1.3
European Union (EU)
This device is declared by Siemens AG to comply with essential requirements and
other relevant provisions of the following EU directives:
•
42
US
Class I, Division 2, Groups A, B, C, D T4
Ex nA nC IIC T4 Gc
Class I, Zone 2, AEx nA nC IIC T4 Gc
2014/34/EU (ATEX)
ATEX – Directive of the European Parliament and the Council of 26 February
2014 on the Approximation of the Laws of the Member States Concerning Equip-
ment and Protective Systems Intended for Use in Potentially Explosive Atmos-
pheres
IEC 60079-0, Edition 6.0 (2011)/EN 60079-0:2012
Explosive Atmospheres – Part 0: Equipment – General Requirements
IEC 60079-15, Edition 4.0 (2010)/EN 60079-15:2010
Explosive Atmospheres – Part 15: Equipment Protection by Type of Protection N
II 3 G
Ex nA nC IIC T4 Gc
EN 60950-1
Information Technology Equipment – Safety – Part 1: General Requirements
RUGGEDCOM RSG2100F
Installation Manual, 01/2020, C79000-G8976-1344-07
Advertisement
Table of Contents
