Quick BTAC Series User Manual page 14

5 - Installation
5.6 - Coupling/Motor assembly
BTAC 386/513
BTAC 386
2 - Lubricate the end of the motor shaft and mount
the upper half-joint.
4 - Tighten the coupling screw, hold down towards the gearleg.
14
1 - Grease the end part of the reducer and insert the lower
half-joint, fix it with an elastic ring, and the elastic coupling in
the end part of the reducer foot shaft.
2 BTAC 386: Tighten the coupling screw the lower elastic joint.
-
2
BTAC513
3 - Mount the motor on the gearleg and fix it to the support.
INSTALLATION AND USE MANUAL BTAC SERIES - REV000A
BTAC Series
BTAC 386
EN