Name And Function Of Each Part; Name Of Each Part - Omron KM1 User Manual

0BOverview
1.2

Name and function of each part

Name of each part

6
1
[1] DIN hook
A hook, which is mounted in each of the upper and lower parts of the main body, is used to
install the product in the DIN rail or on a wall. For the installation procedure, refer to Page 2-9 to
2-11.
[2] Setting switch
DIP switch and rotary switch are used. For the functions and setting procedure, refer to Page
1-8.
[3] Display unit
Displays the operating status of the main body by lighting or blinking LED. For details on the
function of each LED, refer to Pages 1-7 to 4-3.
[4] Display cover
This cover protects the display unit and USB port.
[5] USB port
Insert a USB cable to carry out USB communication with the main body.
[6] Connection connector cover
This cover protects the connection connector (on the main body side).
[7] Horizontally connecting hook
A hook is installed in each of the upper and lower positions. These hooks are used to connect
units to each other.
For the connection procedures ([7] to [9]), refer to Pages 2-7 to 2-8.
[8] Connector (on the main body side)
When connecting units to each other, insert the connector (accessory).
[9] Connector (accessory)
Inserted into the connector to connect connectors to each other (main body side).
* It does not come with the measurement master.
[10] Rating name plate
Displays the model name, ratings, terminal assignments, etc.
1-6
6
3
4
7
1
7
8
2
10
5
9