Output; Event Input - Omron KM1 User Manual

● Output
PMU1A PMU2A
(Electric (Power
power) two-system)
○ ○
Setting output terminals can perform alarm output, total power consumption pulse output, and
3-STATE output.
The output terminals are as follows.
[PMU1A (electric power), PMU2A (power-2 system), EMU8A (pulse/temperature)]
Three transistor output points exist.
[3] Terminal numbers (COM) are common.
3
OUT1
4
[CTD8E (CT expansion)]
One relay output point exists.
3
OUT1
4
* For the output terminal functions, refer to Page 3-9.
● Event input
PMU1A PMU2A
(Electric (Power
power) two-system)
× ×
Using event input requires a combination of PMU1A (electric power), PMU2A (power-2 system),
and EMU8A (pulse/temperature).
To use event inputs, make connections between terminal [9] and [10], [11] and [12], [13] and
[14], [15] and [16], [17] and [18], [19] and [20], and [21] and [22] in EMU8A (pulse/temperature).
For the event input, either Without voltage or With voltage is settable.

Event input 1

イベント入力 1
Input without voltage (NPN)
* For the event input, refer to Page 3-16.
EMU8A CTD8E
(Pulse/temperature) (CT
expansion)
○ ○
3
OUT2
5
EMU8A CTD8E
(Pulse/temperature) (CT
expansion)
○ ×
9
10
O: With output
OUT3
O: With input, X: Without input
Event input 1
イベント入力 1
Input with voltage (PNP)
2.5 Wiring
3
6
9
10
2-29