Table of Contents
Advertisement
9
Disassembly - Assembly
(
Spare Part Drawing/s)
WARNING
Machine may start. Severe injuries possible.
Disconnect machine from air supply.
CAUTION
Incorrect disassembly/assembly can lead to injury of an operator and
damage of the machine.
Disassembly and assembly work may only be carried out by DEPRAG or
qualified personnel.
NOTICE
When disassembling, parts could be lost or damaged.
Only disassemble the machine on top of a flat work surface.
NOTICE
Damage to motor housing and internal parts possible.
Always use protective chucking jaws when clamping motor housing (into a
vice).
9.1. Service Tools (Optional Equipment)
Name
Arbor (to disassemble bearing cover with grooved rotary joint)
Press-in device (for bearing cover and rotor)
Device (to clamp rotor cylinder; disassembly of motor)
pin (to disassemble/assemble wedge 326946)
Arbor (to assemble circlip 800248)
Pin wrench (for threaded fitting 396582)
Chucking device (to clamp motor housing and valve housing – in order to
tighten the motor package with threaded fitting 396582)
Chucking jaws (to clamp motor housing 400336)
Pin wrench (for ring 407371)
Arbor (to assemble silencer 367913)
Arbor (to assemble bearing needle 802332 into clutch shaft 331562)
Arbor (to assemble o-ring 801770 in pistol grip)
Spanner AF 19 (for quick release nipple 804289)
Spanner AF 22 (for connection piece 407465)
Allen key AF 8 (for cover 407372)
Allen key AF 10 (for connection piece 407465)
Speedometer (to check the screwdriver's speed)
20
Order No.
462330
462203
4604751
460744
461292
462325
463147
460745
409528
462156
460405
413645
800408
800416
800450
800451
830390
Advertisement
Table of Contents
