Table of Contents
Advertisement
8.3. Maintenance Plan
The first maintenance should be performed after 250,000 cycles with non-lubricated
air (dry-running) and after 500,000 cycles with lubricated air (standard operation).
In most cases the service interval may be prolonged. However under unfavorable applica-
tion conditions it may also be necessary to reduce the interval. When re-assembling the
screwdriver afterwards, we advise to do about another 30 operating cycles before setting
the required torque, in order to allow a possible seating process of the internal clutch parts.
IMPORTANT
Make sure to fix the servicing intervals in accordance with the degree of use
of the machine and the respective application.
No. Work to be carried out
1.
Check screwdriver for external
damage
2.
Check inserting tool for wear
and tear and if it is undamaged
3.
Check the oil level in the oiler
and refill oiler as needed;
if necessary, re-adjust the oiler
4.
Clean filter of the maintenance
unit, bleed water condensation
and replace filter if necessary
5.
Inspection, testing, cleaning
and lubrication (single shift)
5.1 Check the torque setting
5.2 Clean and grease motor-,
gearing- and clutch parts
6.
Fill approx. 2 - 3 drops of oil into
the air inlet
7.
Check speed and vibration level After assembly
If malfunctioning, we recommend sending the machine to DEPRAG.
Cycles
Before starting work
Before starting work
Regularly
Regularly
Dry-running:
After 250,000 cycles /
at the latest after 6
months
Standard operation:
After 500,000 cycles /
at the latest after 12
months
For the first time after
50,000 cycles, then at
each maintenance
Prior to assembly
After each cleaning /
after assembly
19
Notes
Replace worn or damaged
inserting tools immediately.
Recommended oil
chapter Lubricants
Use cold cleaner e.g.
HAKU 1025-810-1
Check wear parts such as
bearings and vanes and
replace parts if necessary
Clean and grease motor-,
gearing- and clutch parts
Use cold cleaner e.g.
HAKU 1025-810-1
Recommended grease
chapter Lubricants
Recommended oil
chapter Lubricants
chapter Technical Data
Advertisement
Table of Contents
