Illustration 3 - Exchange Of Clutch Spring - Deprag MINIMAT 346-237U Operating Instruction Booklet

NOTICE
The claw of the clutch must engage with the claw of the spindle (located in
clutch bearing).
The hex of the clutch shaft must engage with the hex of the spindle
(located in gearing).
Screwdriver type 346-237U and 346-737U
claw of the clutch
Screwdriver type 346-337U and 346-437U
claw of the clutch

Illustration 3 - Exchange of Clutch Spring

IMPORTANT
Screw adjustment nut onto clutch shaft until minimum one line of the thread
is visible.
clutch spring
clutch spring
15
Clutch 389748 I
half-round bore
hex of the
clutch shaft
adjustment nut
Clutch 396030 A
lock ring
hex of the
clutch shaft
adjustment nut